Dingy
- Thread starter Skeeter63
- Start date
- Status
Stella Maris
Well-known member
- Joined
- Nov 28, 2008
- Messages
- 1,500
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- Helmsman PH38, 11' Boston Whaler, 9' Boston Whaler
- Vessel Name
- Destiny
Tim,
We tow ours behind us. I had the flag staff removed and replaced with a center pull. The aft area had to be reinforced to insure that it would not pull out. We have towed our thirteen foot Boston Whaler as well as our nine foot whaler and our nine foot inflatable all with no issues.
We tow ours behind us. I had the flag staff removed and replaced with a center pull. The aft area had to be reinforced to insure that it would not pull out. We have towed our thirteen foot Boston Whaler as well as our nine foot whaler and our nine foot inflatable all with no issues.
captain's cat
Well-known member
- Joined
- Nov 23, 2008
- Messages
- 500
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- C-Dory Tomcat TC255
- Vessel Name
- THATAWAY
Why would you want/need such a large engine? That's awfully big/heavy for a dingy. A 4HP is usually enough if all you need to do is go from the boat to the shore at an anchorage. There are pictures in some of the albums of how folks carry one on the step at the stern of a 25.
Charlie
Charlie
doke01
Well-known member
- Joined
- Dec 19, 2008
- Messages
- 583
- Fluid Motion Model
- R-25 Classic
- Hull Identification Number
- FMLT2507I607
- Vessel Name
- Nauti Dream (2007)
I assume you mean an inflatable. We just ordered the EZ-LIFT Inflatable davit system ($139.99 at affordableinflatable.com). It's been delivered and it looks pretty good for the price. I will let everyone know how it works out.
Doug Kersten
NautiDream
Doug Kersten
NautiDream
AKDAVE
Active member
- Joined
- Nov 23, 2008
- Messages
- 31
- Fluid Motion Model
- C-248 C
- Hull Identification Number
- FMLT2542K809
- Vessel Name
- Rebecca Ann (2009)
I just installed the EZ-Lift system, but have not tried it yet on the water. I did mount the davits on 40" lengths of 2"x3" aluminum tubing which extend about 16" behind the swim platform. This way the swim platrom is still usable with the inflatable in the davits.
Dave
Dave
- Status