I have a 2022 Cutwater C24 that is having an electric issue after putting about 60 hours on it. I believe I accidentally ran the house batteries down to zero, and now I am only getting power to the house panel if on shore power. The balmar battery monitor also now only shows bank 1 when it used to show banks 1 and 2 (and possibly 3)? The inverter light will turn on green but if I switch the upper left toggle from shore power to inverter to run the AC the panel doesn't turn on. I checked the breakers in the port lazerette and the battery charger is running when plugged into shore power. I have the additional lithium batteries and inverter to run the AC when anchored. So basically engine will start up fine, bank 1 shows 100% SOC, I am getting radio, fridge, navigation, but nothing on the board will work (AC, outlets, microwave, etc.) unless plugged into shore power. Thanks very much.