Diane Perry
New member
- Joined
- Aug 23, 2024
- Messages
- 4
- Location
- Vancouver WA
- Fluid Motion Model
- R-25 Classic
- Hull Identification Number
- 2010 25SC
- Vessel Name
- Mi Amor
I have a 2011 Ranger TugR-25SC with a Yanmar 4BY2-150 Turbo Diesel.
An engine alarm sounds upon starting with no code. My Yanmar engine diagnostic i5601E will not display a code by holding the far right button. After the engine warms up, I can turn the engine off, restart and there is no alarm sound.
I found a post on Tugnuts that the Glow Plugs caused a similar issue.
Can someone provide me a picture/diagram of where the glow plugs are located? I have removed the engine covers and can only see the fuel injectors but no glow plugs. Crossing my fingers that the glow plugs are not located under a valve cover/intake manifold etc. and are easily accessible.
Appreciate any help for a fellow boater.
An engine alarm sounds upon starting with no code. My Yanmar engine diagnostic i5601E will not display a code by holding the far right button. After the engine warms up, I can turn the engine off, restart and there is no alarm sound.
I found a post on Tugnuts that the Glow Plugs caused a similar issue.
Can someone provide me a picture/diagram of where the glow plugs are located? I have removed the engine covers and can only see the fuel injectors but no glow plugs. Crossing my fingers that the glow plugs are not located under a valve cover/intake manifold etc. and are easily accessible.
Appreciate any help for a fellow boater.