EZLoader triple axle trailer and towing advice needed for 30CB

[Bird Dog]

I imagine this is a rare trailer to find used, but I’m looking at all options. Cutwater quit using EZLoader during the pandemic and since they don’t build a 30 anymore the trailer has to be built from drawings (according to FM). I am looking into having one built - I have the tow vehicle here in MT - boat is in Anacortes-want to trailer it to Flathead lake. But if anyone has a used one, please let me know. Thanks

 

[Eagle 2]

Curious, What are your initial findings on cost to have one built?

 

[TristenT]

Call up tuff trailer they can set up the bunks for the semi displacement c28 and c30 hulls. Trailer is a standard design just a different bunk set up

 

[kelpline]

We found a 3 axle 15,000 lb rated trailer used for a Bayliner 32', $10,000. We removed the carpet covered bunks, and added some 6 x 6 fir blocks on the stern brackets, shortened the forward bunks to about 5 feet long. We live 8 blocks from the boat launch in Comox harbour, so we don't go far. Over the years we have modified the stern blocks a bit with a power planer to more closely support the hull, a Cutwater 28, 2011.

 

[kelpline]

We found a 3 axle 15,000 lb rated trailer used for a Bayliner 32', $10,000. We removed the carpet covered bunks, and added some 6 x 6 fir blocks on the stern brackets, shortened the forward bunks to about 5 feet long. We live 8 blocks from the boat launch in Comox harbour, so we don't go far. Over the years we have modified the stern blocks a bit with a power planer to more closely support the hull, a Cutwater 28, 2011.

 

[Bigpapaporsche]

I would recommend an "Electric over Hydraulic Disc Brake System!" The better performance and added safety is unequalled!