Fender hangers

[jpichler]

can anyone please help me locate these fender hangers I am confident I have seen on a picture on tugnuts.

I am looking for these rail mounted plastic fender hangers that clamp to the rail and easily allows to run the fender lines through and adjust the height.

 

[Brian B]

can anyone please help me locate these fender hangers I am confident I have seen on a picture on tugnuts.

I am looking for these rail mounted plastic fender hangers that clamp to the rail and easily allows to run the fender lines through and adjust the height.

Something like this :http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId=62735&catalogId=10001&langId=-1&storeId=11151&storeNum=50304&subdeptNum=50340&classNum=50342#.UdyBpsu9KSM

Tying a clove hitch knot will work just as well if not better.

 

[Lone Star Ranger]

I use fendergrips for my fenders. I waited for a boat show and found a vendor there that made a good deal.
http://www.fendergrip.com/

 

[sleepyboat]

Take a look at the Defender web site. They have much to offer.

 

[trailertrawlerkismet]

I see your from Seattle. I bought what I think you're looking for at Fisheries Supply in Seattle (Ballard) several years ago, you should check them out.

 

[Ken Boyd]

I suspect these Taylor Made clip on plastic fender hangers sold by Overton's are what you are looking for. I've been using them on my R-25 for the past couple of years and they work as advertised. They make hanging and adjusting fenders very easy. If memory serves me correctly they come two to a pack. I've ordered from Overton's on several occasions without any problems. They normally offer free shipping.

http://www.overtons.com/modperl/product ... rchID=4005

 

[aussie]

Hi all,
The hangers look great and make handling ropes much easier I have looked at buying them here in Perth Western Australia and they don't have any that adjust to the rail size :x so could someone help me with the railing size ( Diameter) so I can get the right set 🙂
Cheers
Peter and Ronie B

 

[jpichler]

rail size for your new R27 is 1 inch