Few question on cutwater 30CB

[tickman]

Good day.

Did my first trip with Cutawater 30 CB and can't fugure out few options and can't find answers in owner manual.
1- How transfer control to command bridge ?
2- Spot light doesnt working. Not lighnt, no movement. What does mean switch Deck light ? Swith LED is on, but no any other actions, and spot lignt doesnt working with this switch.
3- I have two bildge pumps and two switches, Front and aft. Front pump make some noise with swith on, but rear doesnt. I know reer pump is working, ( if water level is high ) but not working if swithc is on. Wrong pump or wrong connection ? How this suppost to work ?
4- What is function for this LED ???

Any help is appreciated

 

[Cutwater28GG]

1. in neutral on the original station. press the station button on the other control to take over control in that location.
2. there is an auxiliary switch on the C28 that needs to be on before the light turns on (also need to turn off the light before turning off the aux switch. I assume its the same on the 30
3. check fuse on the switch?
4. dont understand the questoin - what LED?

 

[tickman]

1. in neutral on the original station. press the station button on the other control to take over control in that location.

Thanks you, will try whan will be on boat next time

2. there is an auxiliary switch on the C28 that needs to be on before the light turns on (also need to turn off the light before turning off the aux switch. I assume its the same on the 30

Do you know name on this switch ? I found all switches, except deck light, doing nothing.

3. check fuse on the switch?

Can't find 12V fuse panel. Easy to find 110V, but can't find 12V

4. dont understand the questoin - what LED?

Link was removed by moderator, this is another one
https://imgupload.io/images/2020/12/03/cutwater-led.jpg

 

[Bruce Moore]

I believe that light comes on when you cockpit seats are deployed outboard to remind you to fold them in before getting underway.

Cheers,

Bruce

 

[tickman]

I believe that light comes on when you cockpit seats are deployed outboard to remind you to fold them in before getting underway.

Cheers,

Bruce

Thanks Bruce, I will open seats and see if LED will be on

 

[fishingdad]

On my 30CB in order for the searchlight to work the running light switch also has to be on. That little LED lite drove m nuts until I accidently figured it out and made sure the cockpit seats were all fully closed.