Forward Bilge Pump

Status
Not open for further replies.

ethanbarnett

Well-known member
Joined
May 11, 2015
Messages
208
Fluid Motion Model
C-30 S
Vessel Name
LIBERTY
It appears we inadvertently bumped the f bilge switch and did not know it. So after checking fuses and it still didn’t run I suspect it is kaput. Is their something else to check before going down that dreaded path? And if we are replacing which model should I order? I ask simply because I will order the replacement before pulling it.

Thanks,
 
ethanbarnett":35aymmaw said:
It appears we inadvertently bumped the f bilge switch and did not know it. So after checking fuses and it still didn’t run I suspect it is kaput. Is their something else to check before going down that dreaded path? And if we are replacing which model should I order? I ask simply because I will order the replacement before pulling it.

Thanks,

Ethan,

If you have checked the fuse and it was good then it is possible the pump has gone bad. You could also pull the pump out and turn the impeller by hand then turn on and see if it begins to work again. Sometimes they can get stuck but if your certain the switch was on for an extended period of time it may have gone bad. You can order the pump from us at parts@rangertugs.com, just be sure you have your full hull ID when ordering.

Thank you,
Kevin Lamont
 
Status
Not open for further replies.
Back
Top