ddenver
Active member
- Joined
- Nov 26, 2008
- Messages
- 29
- Fluid Motion Model
- C-28
- Hull Identification Number
- FMLT2732K011
- Non-Fluid Motion Model
- Previously C-Dory Venture 23'
- Vessel Name
- Echo (2011 model; Yanmar 4BY2-180)
G'day. Former owner of a 2011 Ranger Tug 27' here.
Just pulled stuff out of long term storage n found some brand new, never used stuff that might be of interest to Ranger Tug Owners as follows:
GETH*3.5-FLAPKIT x 2: these rubber Flapkits covered the U/W exhaust openings to minimize growth of Marine organisms when engine wasn't running. I am not sure if Ranger used these on boats other then the 2011 models.
GPD M600S 6" x 1 Convex Mirror
GPD M500S 5" x 1 Convex Mirror
Not strictly Ranger parts, but many folks mounted these mirrors on either side to provide better visibility.
I am in the Gulf Shores, AL area.
I can be reached via email @ dgdenver69@gmail.com.
Thanks!
Just pulled stuff out of long term storage n found some brand new, never used stuff that might be of interest to Ranger Tug Owners as follows:
GETH*3.5-FLAPKIT x 2: these rubber Flapkits covered the U/W exhaust openings to minimize growth of Marine organisms when engine wasn't running. I am not sure if Ranger used these on boats other then the 2011 models.
GPD M600S 6" x 1 Convex Mirror
GPD M500S 5" x 1 Convex Mirror
Not strictly Ranger parts, but many folks mounted these mirrors on either side to provide better visibility.
I am in the Gulf Shores, AL area.
I can be reached via email @ dgdenver69@gmail.com.
Thanks!