Fuse location - salon outlets, starboard

Status
Not open for further replies.

LeGeMar

Member
Joined
Apr 28, 2017
Messages
9
Fluid Motion Model
C-288 C
Hull Identification Number
FMLT2915K415
Vessel Name
LeGeMar
The 110v salon outlets, starboard (the one under the galley table, the other in the rear berth) went out. I tested every fuse but obviously missed one. Which one is it??? I have the fuse chart onboard, but some of the labels are confusing.
 
Apologies if pointing what you already know but I would think you would be looking at the breaker panel for a tripped breaker. I think all the fuses are for the 12V wiring. Not sure if there are any GFI plugs installed but that would be the other issue I would investigate. If there are any I would think they would be in the bathroom or by the kitchen sink.
 
Assuming that you were using the inverter and not shore power, I had a similar problem. All visible fuses and circuit breakers appeared to be OK, but the inverter wouldn't turn on. The problem turned out to be what I couldn't see. By reaching up through a hole near the entrance to the cave, I could feel the completely hidden inverter. Exploring the area more with my fingers, I located what felt like a GFI reset button. Pressing it resolved the problem.

Marshall
 
LeGeMar":18dlvhlz said:
The 110v salon outlets, starboard (the one under the galley table, the other in the rear berth) went out. I tested every fuse but obviously missed one. Which one is it??? I have the fuse chart onboard, but some of the labels are confusing.

Hello,

There are no fuses for the 110v outlets. They have re-settable breakers on the AC panel. Since its only the starboard outlets I would try re-setting the GFI itself, it would be on the outlet in the head there is a reset button right in the middle. Hope this helps!!

Thank you,
Kevin Lamont
 
Thanks for your comments and clarifications. It was the GFI.
 
Status
Not open for further replies.
Back
Top