dialtone
Well-known member
- Joined
- Jul 3, 2014
- Messages
- 154
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- CW30 Sedan
This is purely a Fusion 700 and MS-BT200 issue. But since Fusion doesn't have a forum thought I would ask you kind folks.
2014 Cutwater 30 Sedan running Fusion MS-IP700.
Purchased the MS-BT200. Read instructions and said I needed Fusion Link 1.20+. Installed bluetooth module. However after install I lose all LEFT CHANNEL AUDIO.
Verified balance was correct.
Switching back to other sources such as USB, etc. all work fine (full LEFT & RIGHT audio).
I then proceeded to download latest MS-IP700 update which brought my software from V1.1.3255 to V1.1.3360. Also updated remote. Same issue.
I'm starting to think my MS-BT200 has a defective left channel. Verified pins inside of bluetooth module are not broken.
Any other thoughts? I e-mailed Fusion but waiting for reply. Thanks TugNuts!!
2014 Cutwater 30 Sedan running Fusion MS-IP700.
Purchased the MS-BT200. Read instructions and said I needed Fusion Link 1.20+. Installed bluetooth module. However after install I lose all LEFT CHANNEL AUDIO.
Verified balance was correct.
Switching back to other sources such as USB, etc. all work fine (full LEFT & RIGHT audio).
I then proceeded to download latest MS-IP700 update which brought my software from V1.1.3255 to V1.1.3360. Also updated remote. Same issue.
I'm starting to think my MS-BT200 has a defective left channel. Verified pins inside of bluetooth module are not broken.
Any other thoughts? I e-mailed Fusion but waiting for reply. Thanks TugNuts!!