Shangie
Well-known member
- Joined
- Feb 2, 2019
- Messages
- 71
- Fluid Motion Model
- C-24 C SE
- Hull Identification Number
- FMLT21161213
- Vessel Name
- NEMO
Hubs built us a fabulous cockpit table out of Starboard in Sandtone. He mounted it on a fully adjustable Langun mount that allows us to move it up/down or sideways/ forward/backward. It is 24" wide by 30 long with rounded edges (1/8 inch round over) That size is perfect for allowing comfortable access on both sides of the aft 'couch'. We used it this weekend for two days trying to figure out where we prefer some cupholders go and will be putting two of those into the sides so they don't interfere with serving meals, a game of cards, etc. Another neat thing about the mount is that for towing we just lowered it right onto a throw cushion placed on the motor box and locked it down snug as can be. The mount is not the cheapest out there but it is excellent for being able to utilize a table for many uses. We had it swung halfway over the motor bench to lean on when wanting to be outside but still visiting with each other when we shared steering duties. A picture is in our album (I hope). He made the corners by tracing a five gallon bucket on the four ends. No sharp corners to gouge anyone's thighs or the youngest grandchildren's eyes. Cost was $90.00 for Starbrite at Tap Plastics in Lynnwood and we bought the mount on Ebay for about $149.00 and at a fifty dollar discount due to it being a second because of scratches no one will ever see (They seem to always be available through this seller). Will have another $10-15 in cup holders. We couldn't find a table we liked so we had to DIY the project.