Brian B
Well-known member
- Joined
- Apr 19, 2012
- Messages
- 1,117
- Fluid Motion Model
- C-26
- Hull Identification Number
- FMLR2512L910
- Non-Fluid Motion Model
- Sold in 2021
- Vessel Name
- GANSETT RANGER (2010) Yanmar 4BY2-150
I was getting some really obnoxious odors every time the head was flushed as our Summer weather has been in the 90's lately. I searched online and found filters for over $100.00 and they have to be replaced each season.
I came across this article on how to build one for $30.00 so I gave it a try.
It's been installed for one week and has eliminated all odors. I have also pumped the tank without issues.
Here's the link to build it http://www.boatinghowto.com/content/bui ... ilter-288/
You need to join the forum to view the pics.
I built it for less than $30.00, I did not use the J hooks, I attached it to the waste pump out line with zip ties.
Photo of it installed in my photo album
10 minutes to build it, 15 minutes to install it on my R25SC
Activated charcoal can be replaced as needed for a few $$$
I came across this article on how to build one for $30.00 so I gave it a try.
It's been installed for one week and has eliminated all odors. I have also pumped the tank without issues.
Here's the link to build it http://www.boatinghowto.com/content/bui ... ilter-288/
You need to join the forum to view the pics.
I built it for less than $30.00, I did not use the J hooks, I attached it to the waste pump out line with zip ties.
Photo of it installed in my photo album
10 minutes to build it, 15 minutes to install it on my R25SC
Activated charcoal can be replaced as needed for a few $$$