Interior Wood types on a 2013 C28?

S

sierracierra

Active member
Joined
Jul 25, 2017
Messages
40
Fluid Motion Model
R-21 EC
Hull Identification Number
FMLC2839C313
Vessel Name
Artemis
MMSI Number
316037857
Hello, anyone out there able to shed light on the "type" of wood used in the interior of a 2013 Cutwater C28?

Specifically, I would like to know the type of plywood used in the shelves that are above the curtains on either side of the cabin. The horizontal piece is 3/4" , the vertical is 1/2" . I need to replace the port side and am trying to get it to match as close a possible. If i knew what flavour of plywood (i.e. - red oak) and the finish I would like to think I could get it close.

Also, the 1/4" panel below the port window is also in need of replacement, if anyone could tell me what plywood/finish was used, I'd appreciate it.

Thanks in advance,
Glenn
 
sierracierra":a2dh2ytb said:
Hello, anyone out there able to shed light on the "type" of wood used in the interior of a 2013 Cutwater C28?

Specifically, I would like to know the type of plywood used in the shelves that are above the curtains on either side of the cabin. The horizontal piece is 3/4" , the vertical is 1/2" . I need to replace the port side and am trying to get it to match as close a possible. If i knew what flavour of plywood (i.e. - red oak) and the finish I would like to think I could get it close.

Also, the 1/4" panel below the port window is also in need of replacement, if anyone could tell me what plywood/finish was used, I'd appreciate it.

Thanks in advance,
Glenn
Click to expand...

Hey Glenn,

I am not positive if we still use the same from 2013 but currently we use a cherry wood for those panels. You could also order those panels direct from us, may need to do some fine adjustments to fit. You can order via email at parts@rangertugs.com. Hope this helps.

Thanks,
 
Thanks Kevin, I have emailed Parts.

Would it be safe to say the cherry plywood had a finish applied? If so, could you pass along what was used?

Thanks,
Glenn
 
Thanks Kevin,

The teak oil did the trick - very happy with the results.

Cheers,
Glenn
 
You must log in or register to reply here.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top