serpa4
Well-known member
- Joined
- Jun 20, 2020
- Messages
- 286
- Fluid Motion Model
- R-23 (Sterndrive)
- Hull Identification Number
- FMLC3051D818
- Vessel Name
- DayLo
- MMSI Number
- 368173760
New to my 2018 C30. I thought the micro was supposed to run on the battery.
My house battery was on, inverter was sort of on...
I pressed the power button on the inverter. The remote display showed the battery voltage for about 15 seconds and then goes off. If you pushed the select button nothing happens. I'd have to press and hold the power button to what appears to be turning it on again. The two knobs to turn on the inverter in the outside storage compartment was also verified to be on.
Batteries are fully charged.
Micro button on the power panel was also on.
However, the microwave never turned on.
On generator last month, it ran the micro and also when I put the boat on my 2000 watt portable generator the micro is on. Unfortunately last month on our maiden voyage, I didn't run the micro on the batteries, just generator.
How do you make the micro run off batteries?
The rotary knob on the power panel is either shore/generator/off. I left it on off straight up.
Am I missing something?
My house battery was on, inverter was sort of on...
I pressed the power button on the inverter. The remote display showed the battery voltage for about 15 seconds and then goes off. If you pushed the select button nothing happens. I'd have to press and hold the power button to what appears to be turning it on again. The two knobs to turn on the inverter in the outside storage compartment was also verified to be on.
Batteries are fully charged.
Micro button on the power panel was also on.
However, the microwave never turned on.
On generator last month, it ran the micro and also when I put the boat on my 2000 watt portable generator the micro is on. Unfortunately last month on our maiden voyage, I didn't run the micro on the batteries, just generator.
How do you make the micro run off batteries?
The rotary knob on the power panel is either shore/generator/off. I left it on off straight up.
Am I missing something?