Jasco searchlight replacement

ciaran

Active member
Joined
Oct 23, 2024
Messages
36
Fluid Motion Model
R-25 SC
Vessel Name
Livin’ LARJ
Hi guys,
My new-to-me 2010 R25 is coming together nicely with incremental fixes and repairs to get it ready for the next 16 years . Help from you guys has gotten me up and running with engine / fuel data through a new gateway and helped me get the auto-pilot functioning.
My punchlist is pretty short now. I’d like to replace the Jasco searchlight with a preferably LED unit. I’ve been trying to troubleshoot it , power is present etc. but I think I’m out of ideas. Replacement looks like the sensible option.
What searchlights have you had good luck with?

Thank you in advance for weighing in
 
Just an FYI, the NAV lights have to be on for the Jabsco search light to function.

-martin610
 
Just an FYI, the NAV lights have to be on for the Jabsco search light to function.

-martin610
That is very useful info ! I’ll try that! Thank you.
 
Unfortunately that was not the issue. Looking for a good LED light
 
Unfortunately that was not the issue. Looking for a good LED light
Let me know how that works out. I have power to my illuminated Jabsco searchlight controller but no response to any controls with nav lights on. I see the anchor (white) light is part of the same cable bundle coming out of the roof to the searchlight. I’m guessing it’s LED replacement for me. I thought I’d see more tugs with after market searchlights.
 
If you don't get any suggestions, it may be because the search light has so much glare off the bow rail and the white foredeck that most folks never found it very useful and opted for a handheld version out the window. The search lights were eventually deleted as standard items on the smaller Ranger Tugs. I suspect that was because the lack of usefulness didn't justify the expense.
 
If you don't get any suggestions, it may be because the search light has so much glare off the bow rail and the white foredeck that most folks never found it very useful and opted for a handheld version out the window. The search lights were eventually deleted as standard items on the smaller Ranger Tugs. I suspect that was because the lack of usefulness didn't justify the expense.
Ok. That’s something to consider; a handheld is a quick fix.
 
Let me know how that works out. I have power to my illuminated Jabsco searchlight controller but no response to any controls with nav lights on. I see the anchor (white) light is part of the same cable bundle coming out of the roof to the searchlight. I’m guessing it’s LED replacement for me. I thought I’d see more tugs with after market searchlights.
Let me know how that works out. I have power to my illuminated Jabsco searchlight controller but no response to any controls with nav lights on. I see the anchor (white) light is part of the same cable bundle coming out of the roof to the searchlight. I’m guessing it’s LED replacement for me. I thought I’d see more tugs with after market searchlights.
I ended up with a relatively cheap LED spotlight that I picked up at West Marine. Just an on/off switch. And yes, glare from the rails and deck make it marginally useful. I’ve experimented with a rechargeable 1500 lumen led light designed to mount on bike handlebars. When attached to a vertical rail, it works quite well without the bad glare from the roof-mounted spot. It got me out of a marina and a few miles off shore before the sun came up on a recent fishing trip. As slow as we were, 2 fast recreational fishing boats followed us as they had nothing but nav lights.
 
If you don't get any suggestions, it may be because the search light has so much glare off the bow rail and the white foredeck that most folks never found it very useful and opted for a handheld version out the window. The search lights were eventually deleted as standard items on the smaller Ranger Tugs. I suspect that was because the lack of usefulness didn't justify the expense.
It works pretty good if you can get on the forward deck and use the remote. Of course, sometimes this isn't safe or practical.
 
It works pretty good if you can get on the forward deck and use the remote. Of course, sometimes this isn't safe or practical.
Yeah, I attached my bike light at the dock. I just left it on until we reached our fishing spot in a sheltered lee. I went forward in safe conditions then to retrieve it. Definitely a compromise but better visibility than the roof-mounted one.
 
I was in a sailboat race over night as crew onboard a buddys boat, someone said we needed a stern light.. so the owner/captain electrical taped a white flashlight to the stern rail, hence a light to the rear...😀...it was hilarious especially if you knew the captain!!
 
is the spotlight on a new R29 sufficient to drive the boat at night if one needs to relocate? I’ve tested it a bit and the beam seems terribly inadequate to me. What do people do when you’ve got to move after dark? Can the bulbs be changed in it to something more effective or is a different light required? If a different (emergency) light is what’s needed, do people replace the spotlight or do they have an emergency hand held?
 
You really should not be using your spotlight like car head light. It should only be used in short bursts if you need to check channel marker or docking. It should never be left on continuously. If the Coast Guard sees you, you will likely end up with a ticket.
 
Good because I can’t imaging that it would work well for that based upon how poorly it worked when I tested it tied up to the dock.

What do people use then when they have to move at night? Chartplotter and radar or do people have light bars/flirs on their tugs? I came across a Cutwater with a light bar once - and they routinely moved at night. But they’re not widely used in this segment and I don’t think I’ve noticed a RT with a flir either.
 
If you had to move in an anchorage at night, I would use the chart plotter and radar. As a last resort a hand held spotlight. A second or two with the spotlight destroy your night vision for up to 30 minutes
 
I've used my boat in the late evening a few times, and if you ask me, it's downright scary.

The only spotlight powerful enough to make a real difference would probably drain your batteries in five minutes. Just kidding! But seriously, think about driving a car on a wet, rainy night. It's darn near impossible to see. Water does much the same thing. It absorbs and scatters what little candlepower your spotlight, or any light for that matter, puts out. Now consider what's floating out there: logs, crab pots, flotsam and all sorts of debris. Some of that can do serious damage to a smaller boat.

After a few nighttime outings, I decided I just don't do it anymore. But you might ask, what if I get caught out late? Maybe your planning skills need honing. What if the wind blows me off my anchorage? Maybe your anchoring skills need honing.

I've owned my boat for 12 years. During the first three, I thought cruising late at night was fun. I've since changed my mind. My best advice is simple: plan your day so you're not underway or arriving after dark. Even with your chartplotter and other electronics dimmed way down, there's still plenty of glare and reflection inside the cabin to affect your night vision.

I have friends with a 44-foot Lagoon catamaran. I was aboard when their anchor dragged one night. It was scary. Since then, they've sailed to Mexico, stayed two years, and crossed the South Pacific to Australia without another anchoring incident. They credit better anchoring skills and a Rocna anchor.

If you want to improve your anchoring, watch Glen Wagner's video:


Watch it twice. I did last summer, learned something new, and put it to use on my boat. If you follow his advice and you or someone nearby starts dragging anchor at night, you'll at least have tracks on your chartplotter to help you see where you were and regroup.

My point is simple: don't try to turn a Ranger Tug into a nighttime search-and-rescue vessel. Good planning, good anchoring, and knowing when to call it a day are worth a lot more than a brighter spotlight or LED light bar.
 
If you have to run at night for any reason. Have 1 person preserve their night vision for lookout duty. Dont turn on ANY lights except navigation (check that each light is actually working). One person watches the chart plotter on the dim night setting. The other watches the water. Run slow. This works for us from the comand bridge where we don't have the additional issues of windshield. Even with the plotter on night mode at dim setting if you glance at it it ruins your night vision. If there is any moon light it is surprisingly bright when you get accustomed to the dark.

I've never needed to move due to storms etc.
 
Thanks everyone. This is helpful to try to understand what to do if the unexpected happens.

I have zero interest in moving at night but I know things can happen, and having a plan if it does would be important. Sounds like it’s important to preserve night vision at night - having a plan to do that, while it might seem obvious, wasn’t the first thing I was thinking about!

I’ve watched that anchoring video at least a dozen times - always super helpful.

I was on a dock last year and a cutwater came in total pitch black with a massive light bar mounted where the bow ladder initially resided. That thing lit everything up just like a car. It would destroy your night vision of course - and I hadn’t thought about it since, until I spoke with a friend last week who said he has had to move his boat twice in the middle of the night.

Got me thinking about this topic because many unexpected things can result in being on the move in the dark, and having the right equipment might save you big time. Sounds like the boat equipped as is, with a plan for night vision, is probably sufficient if I’m just worried about emergencies.
 
Back
Top