Lift information

Status
Not open for further replies.
L

Lukesdad

Member
Joined
Mar 17, 2017
Messages
16
Fluid Motion Model
C-302 SC
Hull Identification Number
FMLT3112K61
Vessel Name
Little Tug Nutz
Can anyone tell me the pertinent Bunk dimensions and clearances required to put my 31CB on a boat lift
I know the keel and the trim tabs can be an issue and wanted to avoid any potential damage
It’s going on a lift for about 2-3 weeks
Also I have already installed a valve to prevent the AC loosing prime And will be using a portable AC to keep boat cool during the hot Florida summer
Thanks all
 
There's a link under the Ranger Factory technical bulletins for boat lift and trailer drawings. You can download and give these to the company building your lift.

-Kenny
 
thanks, I did look at the drawing however, it was not clear what dimension pertained to the bunk spacing , lastly there is no dimension on the drawing for keel bottom to top of bunk?
thanks
Paul
 
Status
Not open for further replies.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top