Lifting sling locations on C24

wtsawyer

Active member
Joined
Nov 28, 2013
Messages
32
Location
Savannah, GA
Fluid Motion Model
C-24 C
Hull Identification Number
FMLS2427K718
Vessel Name
GUARDIAN
MMSI Number
338505072
I use a local marina with a pair of lifting slings rather than ramp to haul/launch my 2018 C24. Where might I find the proper locations to set the lifting slings on my hull?
Thanks!
 
Easiest is to see if the Factory put Sling with arrow down decals on port and starboard sides of hull.
 
Easiest is to see if the Factory put Sling with arrow down decals on port and starboard sides of hull.
Mine is a 2018 model, and I can find no decals. Might it be etched in the hull?
I'm certain it's not rocket science, if you've any approximate locations to balance the hull out considering my heavy YAMI F 300 OB...
 
I have a 2018 C24 and I have it pulled once or twice a summer to do a short haul. There are no sling decals or marks. The marina I use has experienced employees handling the lift and I let them handle it. The only thing that I do is make sure the door to the cabin and transom door are closed to help reduce flex. I would say the rear sliding is perhaps 3 feet forward of the transom.
Ken
Sunny Daze
2018 C24 300 hp
 
Back
Top