Lowering mast on 2013 R25SC

[Eachtra 27]

Does anyone have a picture of the mast lowered on a 2013R25SC or equivalent? I will be trailering next week so wanted to make sure everything was ready. The mast lowers forward to a support bar that

[/img]as a hole on top, there is nothing on the mast or radar plate that fits the support arm. I recently had the radar replaced and they added an extension plate. On the original radar plate are two holes where something was connected but is now missing. I suspect when they added the extension they removed the piece that connects the mast to the support bar. Any help, pictures would be appreciated. Thanks,

Sean

 

[knotflying]

There should be a U-shaped bracket that is mounted on the bottom of the radar support that slips over the end of the support bar. Then a pin goes through all the holes to secure them together. The guide wires then attach to clips located on the brows.

 

[Bob B.]

Sonder 25,

I trailer my boat, a 2014 25 SC, thousands of miles each year. While I do not have pictures of what you are asking for currently, if you call me I can talk you through it and possibly take the exact pics you are looking for.

I will be home tonight after 6 pm central time.

Bob.

(608) nine 3 five 5 zero 1 7

 

[Eachtra 27]

Thanks for the quick response and willingness to assist. I called the company that upgraded the radar dome, they came out today and installed a new U bracket and pin. She is ready to be towed! Thanks again to the amazing tugnut community.

Sean

 

[Bob B.]

Have a great trip! 😎