Made 4.0 raw water pump failure

Jim and Jackie

Well-known member
Joined
Nov 17, 2016
Messages
143
Fluid Motion Model
C-288 C
Hull Identification Number
FMLT2930C010
Vessel Name
Chessie
How many have had the raw water pump fail? According to the tech and Sergio it’s the pump. Good impeller hose directly to the pump with a bucket of water and it wouldn’t draw water.

Jim Demerest
2010 R29 Chessie
 
If your Mase impeller on the raw water pump is more than 1 year old, replace it.

If your boat lives in salt water, clean the raw water screen and shut off valve.

Unless your sea strainer is the new larger one, replace it.

Or replace the Yanmar air cooled engine powering your generator when it next fails.


Stuart Bell
Ranger 25: Shearwater
(561) 352-1796
 
The problem wasn’t the pump. Turns out it was the small factory installed strainer. The basket was clear but there was junk caught in the input. Replace it with a small Groco raw water strainer and it seems to be working.
 
As I noted, the original factory sea strainer and plumbing were to small for both the generator and ac. Easy to replace.


Stuart Bell
Ranger 25: Shearwater
(561) 352-1796
 
You are right the original strainer was too small. Ongoing problem for the last two years we've owned the boat. We'll see how the rest of the season goes.

Jim Demerest
2010 R 29 Chessie
 
Back
Top