Just Right
Well-known member
- Joined
- Sep 3, 2020
- Messages
- 73
- Fluid Motion Model
- R-21
- Vessel Name
- Just Right
I thought some of you might be interested in my solution for mounting Magma Kettle grill and E propulsion on our 2013 26 Cutwater. I designed and built these after not being able to find a mount with quality and functionality . I wanted a mount when not in use would not interfere with using the swim platform for the dingy .These mounts have been in service for almost two years . The rail clamp is milled from a billet of 6061 Aluminum and the pivot and arm are made of 316 SS. The grill is held in place by two nylon washers clamped with 1/2-13 316 nylon locking nut. The aluminum on these has been cerakoted. Future mounts will be hard anodized. I have some interest around the marina so I'm in the process of a small production run to test the water. Here are the links to pictures and video.
https://www.dropbox.com/s/lawpfzkzwrhsh9i/IMG_0967.MOV?dl=0
https://www.dropbox.com/s/p8xoin24u3qtvv2/IMG_0958.jpg?dl=0
https://www.dropbox.com/s/w3qbxm1mpvbeppr/IMG_0960.jpg?dl=0
https://www.dropbox.com/s/59rxwqpwbmiav41/IMG_0961.jpg?dl=0
https://www.dropbox.com/s/9lludjpt87hjyv9/IMG_0963.jpg?dl=0
https://www.dropbox.com/s/r325ku4lna5g2o5/IMG_0965.jpg?dl=0
https://www.dropbox.com/s/odgs1oxcint119u/IMG_0970.jpg?dl=0
https://www.dropbox.com/s/lawpfzkzwrhsh9i/IMG_0967.MOV?dl=0
https://www.dropbox.com/s/p8xoin24u3qtvv2/IMG_0958.jpg?dl=0
https://www.dropbox.com/s/w3qbxm1mpvbeppr/IMG_0960.jpg?dl=0
https://www.dropbox.com/s/59rxwqpwbmiav41/IMG_0961.jpg?dl=0
https://www.dropbox.com/s/9lludjpt87hjyv9/IMG_0963.jpg?dl=0
https://www.dropbox.com/s/r325ku4lna5g2o5/IMG_0965.jpg?dl=0
https://www.dropbox.com/s/odgs1oxcint119u/IMG_0970.jpg?dl=0
