Manufacturer of through hull fittings

[LET IT BE]

I was back flushing the drain from the side of the deck just below the side door on the starboard side of my 2013 R29. It was plugged with leaves etc so I used a hose with a nozzle that fit the opening. The trough hull appeared to be a chrome fitting but it is a chrome bezel that is possibly glued to the fitting that is bronze. That Chrome "donut" was pulled off when I removed the hose nozzle and I watched it sink to the bottom. I tested one of the other fittings with a magnet hoping that I might be able to retrieve it with a magnet on a string, but it is not magnetic and probably should not be or it would rust. So I would like to know what the manufacturer is and if the chrome part is separate and how it is attached to the rest of the fitting? Then I will try to source a fitting in Canada.

 

[BB marine]

I found that many of the fittings in Marine Hardware's catalog are the same of very similar to Ranger/Cutwater. The representative that I talked to said they have made many parts for Fluid Motion.

 

[Red Raven]

Call the main factory number and ask for Richard in the Parts dept. He’ll get you fixed up or at least point you in the right direction.