Boatagain
Well-known member
- Joined
- Sep 13, 2014
- Messages
- 252
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- Cutwater 30
- Vessel Name
- Gatsby
Generator just installed over the winter and has less than an hour on it. While preparing to cast off, the genny was running for about five minutes with only the A/C and battery charger to power. As I untie the bow line, I hear the gen shut down. When I get back in the cabin the control panel was dark, ie., no error code to be seen.
Now, the control panel does not turn on and, obviously, I can't start the generator. I checked the two breakers on the gen, neither had tripped. Is there a fuse or breaker that supplies 12v to the generator and/or control panel?
Any help greatly appreciated!
Now, the control panel does not turn on and, obviously, I can't start the generator. I checked the two breakers on the gen, neither had tripped. Is there a fuse or breaker that supplies 12v to the generator and/or control panel?
Any help greatly appreciated!