jimbeam
Well-known member
- Joined
- Aug 21, 2019
- Messages
- 172
- Fluid Motion Model
- C-248 C
- Hull Identification Number
- FMLT2545G708
- Vessel Name
- waite & sea
The base plate on the 2008 R25,which allows the mast to be swiveled down for transport, has two broken hinges. Does anyone know where I can get a new base plate?
The 2 barrels where the pins slide into are broken off. This allows the mast to be lowered to the port side of the boat for transport. The plate is about 10 inches by 5 inches
and screwed into the cabin top.
jimbeam
The 2 barrels where the pins slide into are broken off. This allows the mast to be lowered to the port side of the boat for transport. The plate is about 10 inches by 5 inches
and screwed into the cabin top.
jimbeam