Subject: My Webasto heater shutdown prematurely !
I was checking the operations of my Webasto forced air heating system today. One is supposed to run the heater once per month as a preventative maintenance activity.
First I found I had no Webasto User's Manual in my new boat purchase bag.... So I had to recall what I had learned about the Webasto from the 2-day training I had received at time of delivery.
I searched the web for "Webasto SmarTemp Control 2.0 Digital Control which I believe is what RT installs with the Webasto Air Top 2000 ST unit. From this I started the heater (the Control display showed ambient temp was 56ºF) and set a temp of 72ºF and after a short while the heater fired up and nice warm air started coming out of the two heat vents. I left it running for maybe 30 minutes when I noted the heater system had stopped ... that is, no more warm air being felt from the vents and the wind-tunnel like sound at the outside exhaust port had stopped.
I check the ambient temp reading at the SmarTemp Control dial and it was displaying 58ºF. So the 72ºF had not been reached.
Without having a User's Manual that describes the operations and configuration for the SmarTemp Control 2.0 I was a little mystified and all I could think of was that maybe the configuration had been somehow set for the heater's Runtime to be around 30 minutes and not for Continuous running.
No matter.... I will need to get hold of the User's Manual to check the various settings for the Controller.
BTW.... where does the Webasto get it ambient temperature reading from ? Is it at the Controller or somewhere else in the boat ?
I was checking the operations of my Webasto forced air heating system today. One is supposed to run the heater once per month as a preventative maintenance activity.
First I found I had no Webasto User's Manual in my new boat purchase bag.... So I had to recall what I had learned about the Webasto from the 2-day training I had received at time of delivery.
I searched the web for "Webasto SmarTemp Control 2.0 Digital Control which I believe is what RT installs with the Webasto Air Top 2000 ST unit. From this I started the heater (the Control display showed ambient temp was 56ºF) and set a temp of 72ºF and after a short while the heater fired up and nice warm air started coming out of the two heat vents. I left it running for maybe 30 minutes when I noted the heater system had stopped ... that is, no more warm air being felt from the vents and the wind-tunnel like sound at the outside exhaust port had stopped.
I check the ambient temp reading at the SmarTemp Control dial and it was displaying 58ºF. So the 72ºF had not been reached.
Without having a User's Manual that describes the operations and configuration for the SmarTemp Control 2.0 I was a little mystified and all I could think of was that maybe the configuration had been somehow set for the heater's Runtime to be around 30 minutes and not for Continuous running.
No matter.... I will need to get hold of the User's Manual to check the various settings for the Controller.
BTW.... where does the Webasto get it ambient temperature reading from ? Is it at the Controller or somewhere else in the boat ?