No DC pwr anywhere

Status
Not open for further replies.

jimbeam

Well-known member
Joined
Aug 21, 2019
Messages
173
Fluid Motion Model
C-248 C
Hull Identification Number
FMLT2545G708
Vessel Name
waite & sea
All of a sudden I have no DC pwr on the panel at all. It was working fine for everything DC but now none whatsoever.
Is there a main DC breaker switch somewhere, I can't find it. Shore power is fine, batteries appear fine and charged up.
Had a severe lightning storm last night, could a close strike have tripped something? AC panel works just fine and no problem with shore power. I checked fuses but all seem ok, at least what I could see in the rats nest behind the the panel
display and garmin unit. Manual doesn't help at all. I'm assuming their is a main breaker that tripped but where is it?
jimbeam
 
I seem to remember that on my R-27 classic there was one of those thermal breakers near the battery switches.
 
I believe (I'll stand corrected by more knowledgeable folks) if your classic is wired similarly to my 27 classic that there is a thermal breaker below your House power distribution panel in the port locker that feeds the DC panel. Look for a small handled toggle hanging from the bottom of it. If its hanging out, then it tripped. Just flip it back. HTH, Gary
 
Status
Not open for further replies.
Back
Top