Parts list for using compressed air to winterize fresh water

[berger]

In the latest webinar on winterization, Kenny and Andrew said a parts list would be made available to build the "gizmo" to use compressed air to purge the fresh water system.....has this been posted? If so where is it located? If not when will it be posted?
Thank you,
Albert Berger, Lopez Island, WA

 

[Andrew Custis]

I will post it in the Ranger Tug Factory Technical bulletin page for you to download. Hope all is well!

 

[berger]

Andrew,
All is well...great Webinar on Winterizing....thank you guys for doing it.
And thank you for the parts list....
Albert

 

[jlhowland]

Thank you for the parts list. Any chance to get some pictures or a diagram?

 

[Pilotnavigator]

I use the same concept to winterized with RV antifreeze. Remover the strainer and connect a length of hose with the same type of quick connect fitting on the end. Place the end in a 4 litre jug of fluid and turn on the pump. Starting at the farthest tap run each one till pink. Also get an RV bypass kit for the hot water tank many make things easier.

 

[Bruce Moore]

Thank you for the parts list. Any chance to get some pictures or a diagram?

These links were emailed out to folks who registered for the seminar. There's a picture on the 5th or 6th slide of the presentation PDF on Dropbox:

As promised, here are the important links from yesterday’s presentation:
• YouTube video of webinar: https://www.youtube.com/watch?v=mHZr7AN ... e=youtu.be
• Dropbox folder containing a pdf version of the presentation and an excel file of the Q&A log: https://www.dropbox.com/sh/rg6lc7j9ghvb ... TFAha?dl=0

Cheers,

Bruce