Pro mariner

[jswood]

Again...I have problems with pro mariner. It is totally dead. Very similar to problem I had a year ago. Shore power coming into cabin on ac-1 ac-2 with green lights. Ac-2 volt meter shows voltage but Ac-1 shows nothing. Promariner lights are not on even though manual setting if "on" on box below floor I act or on remote inside cabin. I have turned dial "off" and "on" and have reset breaker(s) in stern of boat on incoming shore power a -1 ac-2. Still nothing on ac-1 volt meter. Are there fuses for pro mariner? If so, where? Is there a breaker for pro-mariner?

 

[Kenny Marrs]

Does the unit work on inverter mode?
Have you tried a different cord for AC 1?
Have you tried a different outlet on the dock?

Walking through the steps, cord is hooked up at both ends, breaker in on at the dock, ELCI is on, rotary switch is on Shore power, pro mariner is turned up for charge mode, and AC main is on?

Hopefully it's something simple.

Thanks,
-Kenny

 

[ethanbarnett]

Same problem for me. Is there another ELCI switch, and if yes where? Other troubleshooting tricks?

Thanks

Ethan

 

[IvanGuzman]

Hello Ethan,

The ELCI on your boat is located under the sink/faucet on your cockpit area. There's 2 teak doors and inside of this doors you will see a Blue Seas ELCI breaker towards your upper PORT side inside this compartment. I would also recommend to check what Kenny mention on this chain.

Thank you,