Prop Puller Custom made for Ranger tug or Cutwater 26 3 blade prop

[BB marine]

I made this puller for removing the 3 blade propeller on my Cutwater C26. This will work on any three blade propeller Ranger R25,R27 or C26. The anodes are not included it is just the puller and box that are included. $125.00 plus shipping.

 

[BB marine]

I am updating this post. I have put together a few items that I made or purchased when I owned my C26 Cutwater. These items would be used on a R25 Diesel, R27 diesel and a C26 Diesel. Volvo D3 36MM socket for removing oil filter cover, 2 plumbers wrenches that are pinned to exact size of the packing locking nut and packing nut for packing adjustment, two alignment pins for the installation of the thruster motor. ( pins thread into the housing to aid in alignment when replacing shear pins). Ratcheting Allen for removal of thruster bolts when replacing the shear pin. 3 blade prop puller home made heavy duty. Back plate is milled to fit in front of the prop in between the prop and keel extension. This worked well for removing the prop. No need to be hitting the shaft and prop with a hammer ! Oak dowel rod for the removal of the thruster props.

I have no need for theses items. I sold my Cutwater 5 years ago and have no intention of purchasing another one so I thought I would make them available to someone that can use them. Message me if interested 150.00 plus shipping for all items listed in this post.

 

[Katmat]

You can trust this guy!

 

[zzr7ky]

So on a R25 Diesel I would pull the rudder off, then remove prop?