I am looking at purchasing a 2006 R-21EC that already has the Aft Cockpit Surrey Top with Sunbrella. If I ordered new Aft Side-Enclosures, Clear Strato-Glass from the factory would it fit this boat? Do you have a picture of a R-21EC with the Surrey Top and Side-Enclosures? I live in upstate New York and would like to extend the boating season. Any comments regarding this configuration would be appreciated. Thanks. Russ
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
R-21EC Aft Side-Enclosures, Clear Strato-Glass
- Thread starter Russ
- Start date
- Status
- Not open for further replies.
Capt’nKarl
Well-known member
- Joined
- Feb 22, 2013
- Messages
- 624
- Fluid Motion Model
- C-242 C
- Hull Identification Number
- FMLT2330I718
- Non-Fluid Motion Model
- Previous R-21EC
- Vessel Name
- DRAGONFLY
Russ, I have a 2009 21 EC that has the full enclosure. Go to the photo album section and do an advanced search for NO WORRIES (the boat name). You will see a Christmas photo of the boat with full enclosures. Hope this helps.
Karl
Karl
Capt’nKarl
Well-known member
- Joined
- Feb 22, 2013
- Messages
- 624
- Fluid Motion Model
- C-242 C
- Hull Identification Number
- FMLT2330I718
- Non-Fluid Motion Model
- Previous R-21EC
- Vessel Name
- DRAGONFLY
Russ I bought the boat with the enclosures. The previous owner had them custom made.
Karl
Karl
- Joined
- Nov 21, 2008
- Messages
- 1,389
- Fluid Motion Model
- C-24 C
Hey there Russ,
I would recommend purchasing the enclosure for the surrey top from a canvas shop local to you that can fit it to that boat. We started making our own canvas so ours will not fit your boat.
Best of luck to you,
I would recommend purchasing the enclosure for the surrey top from a canvas shop local to you that can fit it to that boat. We started making our own canvas so ours will not fit your boat.
Best of luck to you,
Speedbump
Member
- Joined
- Sep 21, 2010
- Messages
- 22
- Fluid Motion Model
- C-24 C SE
- Hull Identification Number
- fmlt2127j809
- Vessel Name
- (2009) Tuglet
Russ,
This winter we were unable to locate a local canvas company to make the side curtains for the factory surry.
Instead, we had King Marine Canvas, whom I believe made the surry origionally, make us an enclosure.
Ours is a 2009.
We did have to send them the surry (fabric only) so they could line up the zippers etc.
I have not yet installed it as the boat is still under winter cover but all looks very good.
Around the middle of April "Ice Out" will have us installing the enclosure.
I will be able to speak to the fitment at that point.
Not sure if this helps but it is an option especially if you have trouble finding a local shop.
Dick & Cathy
This winter we were unable to locate a local canvas company to make the side curtains for the factory surry.
Instead, we had King Marine Canvas, whom I believe made the surry origionally, make us an enclosure.
Ours is a 2009.
We did have to send them the surry (fabric only) so they could line up the zippers etc.
I have not yet installed it as the boat is still under winter cover but all looks very good.
Around the middle of April "Ice Out" will have us installing the enclosure.
I will be able to speak to the fitment at that point.
Not sure if this helps but it is an option especially if you have trouble finding a local shop.
Dick & Cathy
- Status
- Not open for further replies.
-
Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.
- User menu