R27 2014 NMEA 2000

Status
Not open for further replies.
D

DaveP27

Member
Joined
Jun 9, 2016
Messages
22
Fluid Motion Model
C-28
Vessel Name
Tugether
Hello, I am wondering where the NMEA 2000 T connector is for the fusion stereo (where it connects to chartplotter). I need to replace my fusion receiver. The connections are all plug and play but the Fusion to charplotter NMEA 2000 T connector location is a mystery to me.

I have a 2014 R27 classic. THanks for your help.
 
The connections are mounted on the wall behind the refrigerator.

You will need to take out the screws, and slide the fridge out to be able to access and reach them.

Sent from my Pixel 2 XL using Tapatalk
 
Thanks Admiral S. That will save me a lot of looking.

Dave
 
You could also take out the fuse/switch panel and reach from there. Unplugging is easy, the reverse is a bit challenging but gently twisting the connector while inserting will work. Long arms help but not all connectors may be reachable.

One of my planned tasks is to relocate this bus and properly apply power to it instead of using the power from the fusion radio

My switch panel has one switch labeled n2000 but nothing is connected to it.
 
Status
Not open for further replies.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top