rschindler
Member
- Joined
- May 19, 2019
- Messages
- 6
- Fluid Motion Model
- C-28
- Hull Identification Number
- USFMLT2726L
- Vessel Name
- Willy Bee
- MMSI Number
- 368015580
Has anyone installed a rudder angle indicator on a R27 inboard?
S. Todd":fj3swikt said:I pulled the invoice on ours and it is the same as the one installed by zekeandboone: Garmin Rudder Feedback 10 (GRF10).
On our boat the rudder angle analog adapter is hooked to the rudder control arm at the inside stern of the boat and then gets plugged into the NMEA backbone which is how it reads on the autopilot screen at the helm. Our install was done by Quality Marine Electronics out of Zeeland, Michigan (qualitymarineelectronics.com).
Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.