R29 CB Shore Power

[mjq1987]

I just reserved a production spot for a 2019 29 CB and I am getting my pier/lift configured for it. I've heard conflicting specs on the shore power requirements. Can you tell me what the specs will be for my model/year? Also, I seem to remember two receptacles on the starboard side. I'm trying to tell my contractor what type of pedestal to install.

 

[Scuba Too]

Hi, we have the R29 CB. The two shore power connections are both 30 amp. The 2nd is used for the AC while the 1st is for everything else. A splitter can be used with a 50 amp pedestal or have them put in a pedestal with 2 30 amp. Most of the time I only hook up Shore Power 1 and only hook up the second one when we need air conditioning (or heater if it's cold out).

 

[AGOGO]

Your boat will be equipped with 2 30amp Shore power connectors. It will also come with the 2 Shore power cords to connect to the dock. Let us know if you have any other questions. Thanks, Mark. Pocket Yacht

 

[bill46]

We have a 31CB and use a 30 to 2-30 splitter all the time. Requires a little power management, no hot water , lasts 2 days from engine heat, with both AC, usually shut off forward AC when cooking, we have propane stove. Never tripped a good breaker. Some marinas have rotten breakers. Usually use a single 25’ cord. Keep 2-50’ and 50 to 2-30 splitter on board. Usually use 50 to single 30 when no 30 available. I ran 50A service to dock, with 2-30, 2-20, and 15a 240 for lift.

 

[mjq1987]

Hey everyone, thanks for your replies, you all answered my questions!

Mike