fishheadbarandgrill
Well-known member
- Joined
- Jul 15, 2018
- Messages
- 638
- Fluid Motion Model
- C-288 C
- Non-Fluid Motion Model
- Sunfish; Vespa GTS 300 Super
- Vessel Name
- Sea Shanty
- MMSI Number
- 368069690
Is water always suppose to flow from the exhaust elbow to the stuffing box or only at higher RPMs. I just had the packing gland replaced and at the sea trial the surfing box was overheating at 121 deg F. There was no water flowing from the exhaust elbow to the stuffing box at idle speed. I did not check at a higher RPM.