Rocna 15 kg on a 2013 R 31-CB

[genelson]

I would like to upgrade my stock 22lb claw that came with the boat to the Rocna 15kg. I have searched other posts and not seen this particular combination of year model and anchor. I am interested if there are any fit issues? I see other boats have had issues with the roll bar or the point of the anchor etc. Any help will be appreciated.

 

[Ken W]

I bought a 15kg Rocna to replace the 10kg Lewmar on my 2017 R31S. It will fit, barely. I use a Mantus swivel. I was used to the Lewmar dragging a bit as it set. The Rocna sets RIGHT NOW.

 

[barbeque2]

I also replaced the anchor with the Ronca 15kg on a 2014 R31-CB. No problem. Like Ken, I use a Mantus swivel. Well worth the price. Anchor sets easily.

 

[genelson]

Thank you for the responses. I will order one up! I already have the Mantis swivel on order.

 

[Jfrano]

Just for others reference, I put this on a 2017 RT29 works great.

 

[Mr. Ed]

I'm waiting for a 15kg traditional Rocna in stainless to arrive. I'll post up how it fits after I get it installed. Assuming, of course, that it fits. :shock:

 

[Mr. Ed]

I'm waiting for a 15kg traditional Rocna in stainless to arrive. I'll post up how it fits after I get it installed. Assuming, of course, that it fits. :shock:

Follow up...

The anchor is gorgeous! However, the point actually touched the composite contact strip on the bow, so I added a Mantus AnchorMate. Got it installed today and it offsets the anchor by about 6" in front of the contact point, and is a practical solution for the clearance issue.