shower sump pump

[wpdaniels]

The shower sump is not working. How is the shower sump connected to power (wiring diagram)? There is no power to the sump. Is there a fuse somewhere? I don't see a separate circuit breaker. Is the sump connected to the bilge pump somewhere?

I have a Ranger 25 Classic (2010).

 

[KennyMarrs]

Hello, you should have an inline fuse going to a positive bus just inboard of the batteries. There's a wiring diagram for the R-25 classic under the factory technical bulletins.

 

[ALICE J]

I found that the float switch was bad, fixed that, then found that pump hose was leaking inside the bilge box, fixed that, then found that a one-way valve was not functioning, took that out because the bilge box was above the water level. Everything now works.

 

[wpdaniels]

Thank you very much for the replies.

The wiring diagram and location of the fuse and connections are very helpful.

The servicing of the pump, float switch and plumbing is consistent with what I am finding.

 

[wpdaniels]

I found the fuse...no fuse. First problem solved.