Steering wheel logo

[pugtug613]

I will assume there was a Ranger logo plate in the center of the wheel. I took delivery on my 2012 R27 March 2014. There is a spot for a logo and some silicone remnants, but no plate. Can I get hold of a logo plate? Please let me know.

Chester
The Pug's Tug

 

[trailertrawlerkismet]

Chester:

You are correct, there should be a blue Ranger Tug logo stick on logo that goes into the center of the steering wheel. On our R27 it kept coming off so I ended up leaving it off. With that said you could contact Richard, the parts manager at Ranger Tugs, with your request. I'll use a stronger adhesive the next time I apply mine back.

Jim

 

[Kenny Marrs]

Hello Chester,

Richard is out this week so if you'd like you can email me direct with your mailing address. My email is kennymarrs@rangertugs.com

Thanks,
-Kenny

 

[andygmontara]

This weekend, I had the metal plate that the Logo goes on fall off on me. I have a 2011 25RC. I found out the plate was held onto the steering hub by a round block of wood and some electrician's tape. I am now hoping that marine epoxy will hold the plate on the wood block. I did drill three more holes thru the plate and wood and counter sunk to give the epoxy more grip. The Logo, has fallen off several times. I am going to try contact cement this time. Enjoy Andy, Keep on Tuggin.

 

[eric]

If there is any chance this was my 27 I can explain. I took the logo off and in its place put one of those things that are to show rudder position. The thing kept falling off and never did work right. Check very close all through the glove box. I think I put it there. But I will also check everything I have at my garage in case I still have it.
Eric EC 21 Sassy Girl