Stern Thruster

Status
Not open for further replies.

allenslade

New member
Joined
Apr 4, 2015
Messages
4
Fluid Motion Model
C-26
Hull Identification Number
FMLT25551708
Vessel Name
AlleMare
Hi, I am a new (to me) 2007 Ranger 25SC owner.
My boat is in pristine condition, but the Stern Thruster has stopped working.
What are the steps I should follow to isolate the problem?
Is there a common first thing to check?

Bow Thruster is working OK.

Allen
 
First, check the archives. There have been several threads on the thrusters that outline the trouble shooting steps.
Failing that, a call to Andrew at the factory.
 
Allen:

Two main problems:
1. Broken Shear Pin. When you activate the motor you will hear the motor spinning at a high rate of speed but no thrust. This means your shear pin is broken. You have to change it. If you have no shear pins, check the case of your bow thruster, there is a clip on the outside that has a spare.

2. No power at all. This is more difficult to diagnose, but there is an excellent report on this site that will get you there.

You can give me a call in Victoria (250) 721-4201 (home) or (250) 661-6182. Delta Marine in Sidney is a Side Power rep.

Dave
Lobo
 
Hello Allen,

The first thing to determine is if the thruster powers up and runs or not. That will help point us in the right direction.

You can also call the office 253-839-5213 and I can go over the issue with you over the phone.

Thanks,
-Kenny
 
Status
Not open for further replies.
Back
Top