Teak/holly floor has come loose

Status
Not open for further replies.
M

Mikep

Well-known member
Joined
Sep 13, 2020
Messages
63
Fluid Motion Model
C-302 C
Vessel Name
Dive In
A section of the floor in my v berth has come loose and I need to reglue. Can I get some insight as to what glue is used at factory and what others have used to fix loose sections.
 
I have photos in my album of replacing the floor material in the V berth area. I used a heat gun to help soften the glue to remove the wood from the fiberglass sole. Once the wood is removed I used a solvent to remove all the old glue so that a good contact surface would be available. Cleaning and prep is important to a good adhesions. I used https://www.google.com/aclk?sa=l&ai=DCh ... pgU&adurl= To glue the floor down. This is what Fluid Motion advised to use. Use a good filter mask when doing this. If not you will be has high as a kite!!!!
 
Status
Not open for further replies.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top