Techma Toilet Panel Not Responding

[Jmarhefka]

Techma Toulet panel not responding - I have recently acquired a 2020 R31 CB. After coming back from vacation of 3 weeks my Techma toilet is not responding. No lights or response. Tried some of the ‘holding buttons down’ with no response. I changed the 25 amp fuse (was not blown) located in the House fuse panel for Head, but nothing - no water or lights. My aft head works fine with water and flush, my macerator runs with switch on. Is there some other reset switch for the Techma Toilet or procedure to wake it up? Tried the Techma site but only found holding down buttons for water fill programing and lockout. My holding tank was just emptied before vacation.

 

[Ernie]

Yes there’s another switch
In the cabinet with the fuses and other stuff in the fwd berth there’s a breaker with a reset switch. It’s next to the windlass breaker and looks similar.

 

[Statton]

Yes there’s another switch
In the cabinet with the fuses and other stuff in the fwd berth there’s a breaker with a reset switch. It’s next to the windlass breaker and looks similar.

This is what needs to be checked next. If you are still not getting power please report back.

 

[Jmarhefka]

That was it - found it. It was unlabeled. Thank you all very much!!!

 

[Someday*]

Is there a similar breaker in the R29CB should this happen to us? (and if so, location?)