South lake
Well-known member
- Joined
- Dec 8, 2011
- Messages
- 222
- Fluid Motion Model
- C-24 C
OK, so a couple of weeks ago I left the fresh water pump turned on over night when I left the boat. I usually make sure it's turned off when I leave but I had one of my senior moments and forgot to do so.
A day or two later I was on the boat and went to fetch something from the bottom cabinet under the galley counter and was surprised to see 1/2 to 3/4's of an inch of water there. Since they're all connected, the water stood in all three cabinets. I checked the gauge on the water tank and it was almost empty. It was almost full before.
So I cleaned up the water and started to try and find how it got from the tank to the cabinet. There was no water on the floor of the cabin, not even down by the forward berth. The shelves above the standing water had things on them including paper and nothing was wet. I opened the access panel under the sink and there was no sign of water or leaks. The only place I found water was in the cabinet although I'm sure water had to make its way to the bilge and was pumped out.
I refilled the tank, turned on the pump, checked everything I could see for leaks, ran water from the faucets in the galley sink and the head and no water was showing up except in the basins where it belonged. I left the pump on for several hours while I puttered around on the boat and still no leaks that I could see. No noise like a cycling pump, no sound of water dripping, no visual of water, etc.
I turned the pump off, locked the boat and came inside to make this post in hopes that one of the Ranger Tug experts on this forum might have an idea of what could be causing this.
Any ideas or suggestions are appreciated...
A day or two later I was on the boat and went to fetch something from the bottom cabinet under the galley counter and was surprised to see 1/2 to 3/4's of an inch of water there. Since they're all connected, the water stood in all three cabinets. I checked the gauge on the water tank and it was almost empty. It was almost full before.
So I cleaned up the water and started to try and find how it got from the tank to the cabinet. There was no water on the floor of the cabin, not even down by the forward berth. The shelves above the standing water had things on them including paper and nothing was wet. I opened the access panel under the sink and there was no sign of water or leaks. The only place I found water was in the cabinet although I'm sure water had to make its way to the bilge and was pumped out.
I refilled the tank, turned on the pump, checked everything I could see for leaks, ran water from the faucets in the galley sink and the head and no water was showing up except in the basins where it belonged. I left the pump on for several hours while I puttered around on the boat and still no leaks that I could see. No noise like a cycling pump, no sound of water dripping, no visual of water, etc.
I turned the pump off, locked the boat and came inside to make this post in hopes that one of the Ranger Tug experts on this forum might have an idea of what could be causing this.
Any ideas or suggestions are appreciated...