DC3
Well-known member
- Joined
- Nov 25, 2020
- Messages
- 81
- Location
- Cumming, GA
- Fluid Motion Model
- C-32 C
- Hull Identification Number
- FMLT32C07H12
- Non-Fluid Motion Model
- Crest 230 tri-toon; BW 130 Super Sport
- Vessel Name
- Blue Heaven
- MMSI Number
- 338546431
I was reading the previous post on Search Lights and did not want to hijack or redirect the discussion.
I do not want to start a controversy here as there may be a legitimate reason in the Pacific Northwest for running with a search light on continuously. On the East Coast I have always been told and read to never run with the search light on. That it can blind other boaters and make your navigation lights difficult, if not impossible to see by oncoming boats. It also destroys your night vision.
The U.S. Coast Guard's Navigation Center specifically warns about the use of high-intensity and specialty lighting that can interfere with other vessels' navigation lights, impair a proper lookout, or confuse other mariners.
A Coast Guard boating safety circular is even more explicit about searchlights, citing improper use such as:
BoatUS also specifically recommends using spotlights only as needed, not leaving them on continuously underway, and avoiding shining the beam directly at another boater or their reflective surfaces.
On my first R25, I tried using the spot light one time and the reflection blinded me. Shortly after, I read an article about the controversy of people using spot lights like car head lights. I never used it again. I use a handle held when I need to spot a channel or hazard markers.
I can understand the use of a search light when docking on a dark dock or loading a trailer at night. Cutwater's are equipped with Docking Lights in the bow under the level of the deck that do not cause night blindness.
Your opinion is welcome.
I do not want to start a controversy here as there may be a legitimate reason in the Pacific Northwest for running with a search light on continuously. On the East Coast I have always been told and read to never run with the search light on. That it can blind other boaters and make your navigation lights difficult, if not impossible to see by oncoming boats. It also destroys your night vision.
The U.S. Coast Guard's Navigation Center specifically warns about the use of high-intensity and specialty lighting that can interfere with other vessels' navigation lights, impair a proper lookout, or confuse other mariners.
A Coast Guard boating safety circular is even more explicit about searchlights, citing improper use such as:
- Leaving searchlights on continuously while underway and interfering with navigation lights.
- Shining searchlights at other vessels and impairing other mariners' night vision.
BoatUS also specifically recommends using spotlights only as needed, not leaving them on continuously underway, and avoiding shining the beam directly at another boater or their reflective surfaces.
On my first R25, I tried using the spot light one time and the reflection blinded me. Shortly after, I read an article about the controversy of people using spot lights like car head lights. I never used it again. I use a handle held when I need to spot a channel or hazard markers.
I can understand the use of a search light when docking on a dark dock or loading a trailer at night. Cutwater's are equipped with Docking Lights in the bow under the level of the deck that do not cause night blindness.
Your opinion is welcome.
Last edited: