Craig Sieber
New member
- Joined
- Feb 6, 2024
- Messages
- 4
- Fluid Motion Model
- C-26
Does anyone know where I can find the transducer on a 2018 RT 29S?
Transducer location on a RT 29S 2018
- Thread starter Craig Sieber
- Start date
JeffreyAC77
Well-known member
- Joined
- Oct 29, 2020
- Messages
- 374
- Location
- Lake Union, Washington
- Fluid Motion Model
- C-302 SC
- Hull Identification Number
- FMLT3106E415
- Vessel Name
- State of Mind
- MMSI Number
- 338394737
On our 2015 R31 it is located in the starboard bilge. Somewhat hidden close to the rear of the boat, but it's there.
dexmot74
Well-known member
- Joined
- Mar 8, 2022
- Messages
- 119
- Location
- Langley, BC
- Fluid Motion Model
- R-29 S
- Vessel Name
- No Worries
- MMSI Number
- 316050863
Check near the rear thruster under the cockpit hatch.
Bosn Mate
Well-known member
- Joined
- Dec 23, 2015
- Messages
- 251
- Fluid Motion Model
- R-29 S
- Hull Identification Number
- FMLT2912I718
- Vessel Name
- Tingira
Craig:
On our 2017 R29S, the transducer is port stern. To access, remove the hatch located under the stern seat. The transducer is down on the bottom angle. Look for an angled black round object with a wire. You may be able to see Airman.
Mike
On our 2017 R29S, the transducer is port stern. To access, remove the hatch located under the stern seat. The transducer is down on the bottom angle. Look for an angled black round object with a wire. You may be able to see Airman.
Mike