Urgently need info on 110v outlets

[KKBoatFanatic]

Help! I have a prospective buyer coming to see my boat in about an hour, and suddenly (of course this has never happened before) none of my 110v outlets are working. Shore power is fine; both AC main 1 and 2 are on and functional. The breaker switches are in ‘on’ position but not illuminated. I tried pushing the GFCI buttons on the protected outlets, but no result. Everything was working fine a couple of days ago. I looked in the manual, and while there’s a nice diagram of the fuses, none of them seem to have anything to do with the 110v outlets. Any ideas from fellow tug nuts?

 

[knotflying]

Sounds like it may be your ECLI breaker. Not sure where it is on your model, but it is usually located as close to the source of 110 power.

 

[KKBoatFanatic]

Sounds like it may be your ECLI breaker. Not sure where it is on your model, but it is usually located as close to the source of 110 power.

Turns out it was the inverter switch. Somehow it got turned off (I’m thinking somebody must have bumped it while going in or out of the cave, or else maybe they thought it was a light switch). In any case, it was off, and once turned back on, all of the LEDs on the breaker panel for the outlets and microwave came back on, and everything is working again. I did not know that the inverter had to be on while plugged into shore power for outlets and microwave to function; you learn something new every day.
🙂