You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
vinyl trim
- Thread starter csj2018
- Start date
Ernie
Well-known member
- Joined
- Sep 28, 2017
- Messages
- 306
- Fluid Motion Model
- C-242 C
- Vessel Name
- Daisy
That happened to my window trim also
I tried a few things that didn’t work
Then I found the solution...patience.
I started on the left side and applied Gorilla Glue to about 3 or 4 inches, applied mostly to the bead on the vinyl trim. Then I applied pressure and used a heavy weight to sort of keep it in place. I left it alone for at least 24 hours then...
I did it again with 3 or 4 more inches. After several days, not consecutive, just when I was at the dock messing around , I was finished all the way across the bottom
It worked, but it took a little time.
I tried a few things that didn’t work
Then I found the solution...patience.
I started on the left side and applied Gorilla Glue to about 3 or 4 inches, applied mostly to the bead on the vinyl trim. Then I applied pressure and used a heavy weight to sort of keep it in place. I left it alone for at least 24 hours then...
I did it again with 3 or 4 more inches. After several days, not consecutive, just when I was at the dock messing around , I was finished all the way across the bottom
It worked, but it took a little time.
-
Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.
- User menu