gallatintug
Active member
- Joined
- Aug 24, 2019
- Messages
- 41
- Fluid Motion Model
- R-21 EC
- Hull Identification Number
- FML28C23F121
- Vessel Name
- PLANE TO SEA
- MMSI Number
- 368220240
I have the Volvo manuals, Owner's and Service and Maintenance. The manuals are somewhat confusing to me. I have searched this site for information, but can't seem to find the answers. My new C28 will be stored in my heated shop here in Montana this winter. The engine has 27 total hours on it since I purchased it in early September. The last body of water the boat was in was a freshwater lake. Here are my questions:
1. I was told by the dealer that the engine has "break-in oil" that should be changed after 50-100 hours. Should I change the oil anyway since it will be stored for 7-8 months?
2. Volvo recommend the transmission oil and filter change be done at 25 hrs. Is this the reverse gear they are referring to? My Product Designation from the plate is HS68A-A.
3. Do I need to drain the heat exchanger, charge air cooler, impeller pump, and hoses as recommended by Volvo (referring to 'Seawater")? The engine has been operated the last 8 hours or so in freshwater.
4. I have treated the fuel with Biobor JF and run the engine with it circulated. Besides topping the tank with this treated fuel, is there anything else I should do?
5. I plan to keep the shore power plugged in to keep the batteries charged. I have pulled the bilge fuses to prevent the pumps from their cycling.
Are there any other things I should know about?
Thanks for any help!
1. I was told by the dealer that the engine has "break-in oil" that should be changed after 50-100 hours. Should I change the oil anyway since it will be stored for 7-8 months?
2. Volvo recommend the transmission oil and filter change be done at 25 hrs. Is this the reverse gear they are referring to? My Product Designation from the plate is HS68A-A.
3. Do I need to drain the heat exchanger, charge air cooler, impeller pump, and hoses as recommended by Volvo (referring to 'Seawater")? The engine has been operated the last 8 hours or so in freshwater.
4. I have treated the fuel with Biobor JF and run the engine with it circulated. Besides topping the tank with this treated fuel, is there anything else I should do?
5. I plan to keep the shore power plugged in to keep the batteries charged. I have pulled the bilge fuses to prevent the pumps from their cycling.
Are there any other things I should know about?
Thanks for any help!