Morelords
Active member
- Joined
- Jun 21, 2021
- Messages
- 36
- Fluid Motion Model
- C-30 CB
- Hull Identification Number
- FMLT2907G920
- Vessel Name
- Miss Calculated
Hello Tugnuts,
For those of you with the Volvo Penta HS63A reverse gear with low speed trolling function, do any of you happen to know the required gap range between the sensor tip and the metal sensor ring? I can't find the installation instructions anywhere online. I removed the sensor to deal with some rust on the steel mounting bracket, and when I reinstalled the sensor, it appears to be touching the ring (it looked like there was a slight gap before I removed it, and of course I didn't measure the gap beforehand🙄.
For those of you with the Volvo Penta HS63A reverse gear with low speed trolling function, do any of you happen to know the required gap range between the sensor tip and the metal sensor ring? I can't find the installation instructions anywhere online. I removed the sensor to deal with some rust on the steel mounting bracket, and when I reinstalled the sensor, it appears to be touching the ring (it looked like there was a slight gap before I removed it, and of course I didn't measure the gap beforehand🙄.
