What is 2016 R-25SC Bow Eye to Transom Dimension?

[Braveheart]

I need this dimension in order to find the correct size trailer.
Anyone please.

 

[chicagosam]

Per the R-25 Lift drawing (found under the Ranger Factory Technical Bulletins Sub Forum) it is 294" or 24'-6"

 

[BB marine]

Per the R-25 Lift drawing (found under the Ranger Factory Technical Bulletins Sub Forum) it is 294" or 24'-6"

This dimension is very close but the two hulls are completely different. R-25sc is the inboard semi displacement hull the R25 lift drawing is for the outboard model completely different hull. The overall length minus platform R-25sc is 24' 7". Most boat trailers ,boat length exact length is not that important. Winch stands are adjustable by 6" to 12" total fore and aft. The more important measurements are the measurements and adjustments of the bunks. Placement of the bunks based on thru hull fittings, lifting strakes and keel. EZ Load trailer manufacture will have specs. Most boat trailer manufactures have the ability to get boat specs. The key is confirming thru hull locations when sizing a trailer. Another component is total weight of boat. It is not recommended to use dry weight specs 6200 lbs. Example C26 has a dry weight of 6750 lbs which is not close to total weight delivered, then add additional fuel, water and gear. I have a 15000 lbs GVW trailer. Trailer weighs 2300lbs that gives a 12700 lbs capacity. More capacity than needed is better than marginal.The C26 on the trailer with gear and equipped 10K +/- 500lbs.