WWYD What would you do?

[OverTime]

I bought a 2025 and had (have) plenty of issues to keep me busy. Even a "brand new" boat will need some things addressed.

 

[bob daily]

I did buy a new one last year. Still trying to get its problems fixed.

At least with a used boat you expect items and equipment will need to be fixed and repaired/replaced. Hopefully the money that is saved will offset this loss!
The depreciation on a new boat is more than enough to offset a lot of repairs.
The average sales price of a 10 year old boat is around 50% of the cost of a new one.
Just my opinion, Bob

 

[Red Squirrel]

I did buy a new one last year. Still trying to get its problems fixed.

Really! What problems did you have on a new tug?

 

[OverTime]

Really! What problems did you have on a new tug?

Well, the chain locker was not draining for one...I made a entire post on it and the fix. It was quite surprising. The compass on the flybridge needed to be calibrated, I made a change for the better on our propane system and other small little odds and ends that needed to be touched up, re glued, realigned, tightened etc. I will relocate the fresh water pump soon to make access to the strainer possible, plus one of the hose clamps is actually obstructing the discharge from the pump, resulting in low flow. This is off the top of my head, I am on my boat a lot and am constantly tinkering, it's an aspect of the hobby that I really enjoy.

 

[zzr7ky]

Currently refitting a 2008 R25... 100hours on original Cummins 150.
Doc's list seems spot on. I am also replacing the Hot water tank, and freshwater tubing. I am comfortable doing these things. I did offer a lower offer. I am adding the navigation features that I desire for Great Lakes, and the Loop.
Best of luck with your journey!
Mike
2908 R-25 Sweet Pea

 

[OverTime]

Oh, and I just replaced the solenoid fill valve for the Tecma toilet. It has only been in use since June. When I pulled it apart, it looks like the diagram somehow came loose.