Zinc anode at end of our 2012 R-27 with a Yanmar 180.

[prhugret@gmail.com]

I am looking for assistance with the part number/information for the zinc anode at the end of the propeller shaft. It goes over a 2 1/8" nut. Any guidance would be most appreciated as I'm getting KATHLEEN ready for her 2025 season. Thank you.

IMG_4335.jpeg

• prhugret@gmail.com
• Jul 13, 2024

KATHLEEN

 

[Rode Trip]

If you go to boatzincs.com and search 'Propeller nut D 1-1/4"" you will see them in zinc, aluminum, and magnesium depending on which you need for your waters.

 

[prhugret@gmail.com]

If you go to boatzincs.com and search 'Propeller nut D 1-1/4"" you will see them in zinc, aluminum, and magnesium depending on which you need for your waters.

Thank you so much--ordered and on it's way. KATHLEEN will now be able to splash on time!

 

[jimbeam]

Thank you so much--ordered and on it's way. KATHLEEN will now be able to splash on time!

Don't forget anodes on your trim tabs. I almost bought a used R27. Lifted out of the water and no anodes on trim tabs. The mountings to the hull were completely corroded
and screws already falling out. Obviously told me poor maintenance or caring for the boat so I rejected it.
jimbeam

 

[prhugret@gmail.com]

Thank you so much--ordered and on it's way. KATHLEEN will now be able to splash on time!

Thank you-I had changed those (pretty well used eaten up, but still present) as they were "generic" as were the struts and shaft.

 

[dtolmie]

Anyone have a complete list of the zincs for an r27 classic? I made a list at my last haul out but have since lost it.