volvo

  1. G

    Volvo engine anodes

    Hi, When I received my orientation from my dealer (Bellingham Yachts) they told me the only anodes on my 2021 Cutwater 28 were the prop and the 2 thrusters. I had them change them from zinc to aluminum. However, reading threads from other older model boats with Volvo diesels, they show sea...
  2. M

    Engine mount lag bolts

    My 2017 R29 need the engine mount lag bolts tightened every 50 -100 hours. Engine has 1100 hours. Existing lag bolts are 3/8 x 2 with 5/8 head. One was stripped, so I put 1/2 x 2 with 3/4 head. How long can I go before I hit the fiberglass outer skin of hull? What material is the bolt...
  3. Red Raven

    Volvo Penta Easy Connect and Garmin Chartplotter compatibility snafu

    Just a heads up for those who may add the Volvo Penta Easy Connect adaptor to add smart phone Bluetooth interface to your Volvo engine. I added the Volvo PentaEasy Connect Bluetooth interface to our 2014 R27 with Volvo D3-200 and Garmin GPSMAP 7212 Chartplotter over the winter. Upon spring...
  4. TristenT

    c28 drive shaft coupler

    Noticed a small amount of fore and aft moment from the couple on the drive shaft when unbolted from the transmission, wondering the type of coupler used for a 2013 c28 with the d4. I slid the shaft back as far as I could but could not get a good look to see if there was a nut which I believe...
  5. C

    2019 Cutwater 30CB Transmission Solenoids

    2019 Cut 30CB, Volvo penta D6 435. I'm getting the "Check Shift Actuator" alarm and error code on the VP helm display. Won't shift into F or R, and will not rev above idle. Luckily, boat is in my home slip. VP tech unavailable in my area for several days or weeks. First, what transmission...
  6. Cutwater28GG

    stuffing box packing material

    Hi team, Do you know what stuffing box material I should be using for a cutwater 28?
  7. AGLyme

    Air Con issue please

    RT31cb: Stateroom Air Con works well The Salon unit throws off the “HPF” code… tried running the fan only, the fan will NOT run either. I read the many posts about priming the raw water pump… however, the strainer and pump are feeding the Stateroom Air fine… How can I isolate the salon raw...

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top